Ray Ban Sunglasses Australia – Should It Get Any Better Than This..

We’ve become something of an expert in Cheap Ray Bans so we see and hold a great deal of their sunglasses. Sometimes our customers bring their “Ray-Ban” sunglasses in to us for repairs or spare parts and we need to inform them their sunglasses are fakes. Here’s how you can spot a genuine Ray-Ban from the fake.

Quality and complete? Genuine Ray-Ban sunglasses are hand produced in Italy and, as a result, are of a very good quality of material and finish. Hold your Ray-Bans and also a close look. Do they really feel of the quality weight? Is the finish round the joints of a top quality? Real acetate Ray-Bans like the Wayfarer aren’t made in a mold, these are cut from a solid block of top quality acetate and hand polished. They ought to have zero seams or rough joints inside the acetate material. If you don’t have the opportunity to look closely and feel the product then maybe it’s best never to buy.

All Ray-Ban lenses are of the best quality but a lot of the classic Ray-Ban designs include superior glass lenses. Tap the lenses carefully and feel should they be made from glass. Fakes hardly ever use glass lenses. If it’s not glass then don’t panic, some newer designs use many other materials; Try checking for the logos instead.

All original Ray-Bans have a “RB” etched onto one lens (check the far left side of the left lens) and “Ray-Ban” printed in white in the top corner in the other. On fakes this etching will be either missing or of poor quality. The “RB” etching should be crisp and etched, not painted on.

For those who have chosen Ray Ban Sunglasses Australia, then the right lens could have “Ray-Ban P” developed in the best corner nevertheless the “RB” etching continues to be the same. Needless to say polarized lenses cost some extra (discover why here) so you’ll be wanting to be sure you have got the polarized lenses you bought. Ray-Ban Polarized lenses usually have “Ray-Ban P” within the top corner. When the “P” is missing be mindful.

All Ray-Ban Original Wayfarers have a silver coloured seven barrel hinge (see the image below). This means that the hinge has seven interlocking loops for that bolt to pass through. Hinges of the quality are certainly not usually seen on inferior fake sunglasses. The hinge is held to the acetate (plastic) frame with two metal rivets on the front and two on the side.

Hinges on the Clubmaster can look very similar to the Wayfarer shown below just with five barrels on the hinge rather than seven. Obviously, other genuine Ray-Ban models may have different hinges but always check that they look of excellent quality. When the frame is made of acetate (plastic) then the hinges needs to be embedded neatly into the frame instead of showing pbhhzy traces of glue or melted plastic.

?Hinges on metal frames such as the Aviator should be held rich in quality screws that match the colour from the metal frame. Nose pads are the small rubberised cushions that take a seat on you nose to aid the sunglasses. Most Ray-Ban metal sunglasses have transparent nose pads with all the Ray-Ban logo embossed within their centre (see below). On a few of their metal sunglasses the nose pads is a pale peach colour but the logo on the metal centre will still be visible should you look closely. Most fakes will not have these nose pads.

??If you still need doubts regarding the authenticity of Ray Ban Sale then you definitely should contact Ray-Ban directly via their site. And even though hopefully this informative guide has become helpful, please note which it intended as a guide only and that we are not able to discuss specific cases of suspected fake.

Leave a Reply

Your email address will not be published. Required fields are marked *